# A TOML linter such as https://taplo.tamasfe.dev/ can use this schema to validate your config. # If you encounter any issues, please make an issue at https://github.com/yazi-rs/schemas. "$schema" = "https://yazi-rs.github.io/schemas/keymap.json" [manager] keymap = [ { on = "", run = "escape", desc = "Exit visual mode, clear selected, or cancel search" }, { on = "", run = "escape", desc = "Exit visual mode, clear selected, or cancel search" }, { on = "q", run = "quit", desc = "Exit the process" }, { on = "Q", run = "quit --no-cwd-file", desc = "Exit the process without writing cwd-file" }, { on = "", run = "close", desc = "Close the current tab, or quit if it is last tab" }, { on = "", run = "suspend", desc = "Suspend the process" }, # Hopping { on = "k", run = "arrow -1", desc = "Move cursor up" }, { on = "j", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -50%", desc = "Move cursor up half page" }, { on = "", run = "arrow 50%", desc = "Move cursor down half page" }, { on = "", run = "arrow -100%", desc = "Move cursor up one page" }, { on = "", run = "arrow 100%", desc = "Move cursor down one page" }, { on = "", run = "arrow -50%", desc = "Move cursor up half page" }, { on = "", run = "arrow 50%", desc = "Move cursor down half page" }, { on = "", run = "arrow -100%", desc = "Move cursor up one page" }, { on = "", run = "arrow 100%", desc = "Move cursor down one page" }, { on = [ "g", "g" ], run = "arrow -99999999", desc = "Move cursor to the top" }, { on = "G", run = "arrow 99999999", desc = "Move cursor to the bottom" }, # Navigation { on = "h", run = "leave", desc = "Go back to the parent directory" }, { on = "l", run = "enter", desc = "Enter the child directory" }, { on = "", run = "leave", desc = "Go back to the parent directory" }, { on = "", run = "enter", desc = "Enter the child directory" }, { on = "H", run = "back", desc = "Go back to the previous directory" }, { on = "L", run = "forward", desc = "Go forward to the next directory" }, # Seeking { on = "K", run = "seek -5", desc = "Seek up 5 units in the preview" }, { on = "J", run = "seek 5", desc = "Seek down 5 units in the preview" }, # Selection { on = "", run = [ "select --state=none", "arrow 1" ], desc = "Toggle the current selection state" }, { on = "v", run = "visual_mode", desc = "Enter visual mode (selection mode)" }, { on = "V", run = "visual_mode --unset", desc = "Enter visual mode (unset mode)" }, { on = "", run = "select_all --state=true", desc = "Select all files" }, { on = "", run = "select_all --state=none", desc = "Inverse selection of all files" }, # Operation { on = "o", run = "open", desc = "Open selected files" }, { on = "O", run = "open --interactive", desc = "Open selected files interactively" }, { on = "", run = "open", desc = "Open selected files" }, { on = "", run = "open --interactive", desc = "Open selected files interactively" }, { on = "y", run = "yank", desc = "Yank selected files (copy)" }, { on = "x", run = "yank --cut", desc = "Yank selected files (cut)" }, { on = "p", run = "paste", desc = "Paste yanked files" }, { on = "P", run = "paste --force", desc = "Paste yanked files (overwrite if the destination exists)" }, { on = "-", run = "link", desc = "Symlink the absolute path of yanked files" }, { on = "_", run = "link --relative", desc = "Symlink the relative path of yanked files" }, { on = "", run = "hardlink", desc = "Hardlink yanked files" }, { on = "Y", run = "unyank", desc = "Cancel the yank status" }, { on = "X", run = "unyank", desc = "Cancel the yank status" }, { on = "d", run = "remove", desc = "Trash selected files" }, { on = "D", run = "remove --permanently", desc = "Permanently delete selected files" }, { on = "a", run = "create", desc = "Create a file (ends with / for directories)" }, { on = "r", run = "rename --cursor=before_ext", desc = "Rename selected file(s)" }, { on = ";", run = "shell --interactive", desc = "Run a shell command" }, { on = ":", run = "shell --block --interactive", desc = "Run a shell command (block until finishes)" }, { on = ".", run = "hidden toggle", desc = "Toggle the visibility of hidden files" }, { on = "s", run = "search fd", desc = "Search files by name using fd" }, { on = "S", run = "search rg", desc = "Search files by content using ripgrep" }, { on = "", run = "escape --search", desc = "Cancel the ongoing search" }, { on = "z", run = "plugin zoxide", desc = "Jump to a directory using zoxide" }, { on = "Z", run = "plugin fzf", desc = "Jump to a directory or reveal a file using fzf" }, # Linemode { on = [ "m", "s" ], run = "linemode size", desc = "Set linemode to size" }, { on = [ "m", "p" ], run = "linemode permissions", desc = "Set linemode to permissions" }, { on = [ "m", "c" ], run = "linemode ctime", desc = "Set linemode to ctime" }, { on = [ "m", "m" ], run = "linemode mtime", desc = "Set linemode to mtime" }, { on = [ "m", "o" ], run = "linemode owner", desc = "Set linemode to owner" }, { on = [ "m", "n" ], run = "linemode none", desc = "Set linemode to none" }, # Copy { on = [ "c", "c" ], run = "copy path", desc = "Copy the file path" }, { on = [ "c", "d" ], run = "copy dirname", desc = "Copy the directory path" }, { on = [ "c", "f" ], run = "copy filename", desc = "Copy the filename" }, { on = [ "c", "n" ], run = "copy name_without_ext", desc = "Copy the filename without extension" }, # Filter { on = "f", run = "filter --smart", desc = "Filter files" }, # Find { on = "/", run = "find --smart", desc = "Find next file" }, { on = "?", run = "find --previous --smart", desc = "Find previous file" }, { on = "n", run = "find_arrow", desc = "Go to the next found" }, { on = "N", run = "find_arrow --previous", desc = "Go to the previous found" }, # Sorting { on = [ ",", "m" ], run = [ "sort modified --reverse=no", "linemode mtime" ], desc = "Sort by modified time" }, { on = [ ",", "M" ], run = [ "sort modified --reverse", "linemode mtime" ], desc = "Sort by modified time (reverse)" }, { on = [ ",", "c" ], run = [ "sort created --reverse=no", "linemode ctime" ], desc = "Sort by created time" }, { on = [ ",", "C" ], run = [ "sort created --reverse", "linemode ctime" ], desc = "Sort by created time (reverse)" }, { on = [ ",", "e" ], run = "sort extension --reverse=no", desc = "Sort by extension" }, { on = [ ",", "E" ], run = "sort extension --reverse", desc = "Sort by extension (reverse)" }, { on = [ ",", "a" ], run = "sort alphabetical --reverse=no", desc = "Sort alphabetically" }, { on = [ ",", "A" ], run = "sort alphabetical --reverse", desc = "Sort alphabetically (reverse)" }, { on = [ ",", "n" ], run = "sort natural --reverse=no", desc = "Sort naturally" }, { on = [ ",", "N" ], run = "sort natural --reverse", desc = "Sort naturally (reverse)" }, { on = [ ",", "s" ], run = [ "sort size --reverse=no", "linemode size" ], desc = "Sort by size" }, { on = [ ",", "S" ], run = [ "sort size --reverse", "linemode size" ], desc = "Sort by size (reverse)" }, { on = [ ",", "r" ], run = "sort random --reverse=no", desc = "Sort randomly" }, # Goto { on = [ "g", "h" ], run = "cd ~", desc = "Go to the home directory" }, { on = [ "g", "c" ], run = "cd ~/.config", desc = "Go to the config directory" }, { on = [ "g", "d" ], run = "cd ~/Downloads", desc = "Go to the downloads directory" }, { on = [ "g", "" ], run = "cd --interactive", desc = "Go to a directory interactively" }, # Tabs { on = "t", run = "tab_create --current", desc = "Create a new tab with CWD" }, { on = "1", run = "tab_switch 0", desc = "Switch to the first tab" }, { on = "2", run = "tab_switch 1", desc = "Switch to the second tab" }, { on = "3", run = "tab_switch 2", desc = "Switch to the third tab" }, { on = "4", run = "tab_switch 3", desc = "Switch to the fourth tab" }, { on = "5", run = "tab_switch 4", desc = "Switch to the fifth tab" }, { on = "6", run = "tab_switch 5", desc = "Switch to the sixth tab" }, { on = "7", run = "tab_switch 6", desc = "Switch to the seventh tab" }, { on = "8", run = "tab_switch 7", desc = "Switch to the eighth tab" }, { on = "9", run = "tab_switch 8", desc = "Switch to the ninth tab" }, { on = "[", run = "tab_switch -1 --relative", desc = "Switch to the previous tab" }, { on = "]", run = "tab_switch 1 --relative", desc = "Switch to the next tab" }, { on = "{", run = "tab_swap -1", desc = "Swap current tab with previous tab" }, { on = "}", run = "tab_swap 1", desc = "Swap current tab with next tab" }, # Tasks { on = "w", run = "tasks_show", desc = "Show task manager" }, # Help { on = "~", run = "help", desc = "Open help" }, { on = "", run = "help", desc = "Open help" }, ] [tasks] keymap = [ { on = "", run = "close", desc = "Close task manager" }, { on = "", run = "close", desc = "Close task manager" }, { on = "", run = "close", desc = "Close task manager" }, { on = "w", run = "close", desc = "Close task manager" }, { on = "k", run = "arrow -1", desc = "Move cursor up" }, { on = "j", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "inspect", desc = "Inspect the task" }, { on = "x", run = "cancel", desc = "Cancel the task" }, # Help { on = "~", run = "help", desc = "Open help" }, { on = "", run = "help", desc = "Open help" }, ] [select] keymap = [ { on = "", run = "close", desc = "Cancel selection" }, { on = "", run = "close", desc = "Cancel selection" }, { on = "", run = "close", desc = "Cancel selection" }, { on = "", run = "close --submit", desc = "Submit the selection" }, { on = "k", run = "arrow -1", desc = "Move cursor up" }, { on = "j", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, # Help { on = "~", run = "help", desc = "Open help" }, { on = "", run = "help", desc = "Open help" }, ] [input] keymap = [ { on = "", run = "close", desc = "Cancel input" }, { on = "", run = "close --submit", desc = "Submit the input" }, { on = "", run = "escape", desc = "Go back the normal mode, or cancel input" }, { on = "", run = "escape", desc = "Go back the normal mode, or cancel input" }, # Mode { on = "i", run = "insert", desc = "Enter insert mode" }, { on = "a", run = "insert --append", desc = "Enter append mode" }, { on = "I", run = [ "move -999", "insert" ], desc = "Move to the BOL, and enter insert mode" }, { on = "A", run = [ "move 999", "insert --append" ], desc = "Move to the EOL, and enter append mode" }, { on = "v", run = "visual", desc = "Enter visual mode" }, { on = "V", run = [ "move -999", "visual", "move 999" ], desc = "Enter visual mode and select all" }, # Character-wise movement { on = "h", run = "move -1", desc = "Move back a character" }, { on = "l", run = "move 1", desc = "Move forward a character" }, { on = "", run = "move -1", desc = "Move back a character" }, { on = "", run = "move 1", desc = "Move forward a character" }, { on = "", run = "move -1", desc = "Move back a character" }, { on = "", run = "move 1", desc = "Move forward a character" }, # Word-wise movement { on = "b", run = "backward", desc = "Move back to the start of the current or previous word" }, { on = "w", run = "forward", desc = "Move forward to the start of the next word" }, { on = "e", run = "forward --end-of-word", desc = "Move forward to the end of the current or next word" }, { on = "", run = "backward", desc = "Move back to the start of the current or previous word" }, { on = "", run = "forward --end-of-word", desc = "Move forward to the end of the current or next word" }, # Line-wise movement { on = "0", run = "move -999", desc = "Move to the BOL" }, { on = "$", run = "move 999", desc = "Move to the EOL" }, { on = "", run = "move -999", desc = "Move to the BOL" }, { on = "", run = "move 999", desc = "Move to the EOL" }, { on = "", run = "move -999", desc = "Move to the BOL" }, { on = "", run = "move 999", desc = "Move to the EOL" }, # Delete { on = "", run = "backspace", desc = "Delete the character before the cursor" }, { on = "", run = "backspace --under", desc = "Delete the character under the cursor" }, { on = "", run = "backspace", desc = "Delete the character before the cursor" }, { on = "", run = "backspace --under", desc = "Delete the character under the cursor" }, # Kill { on = "", run = "kill bol", desc = "Kill backwards to the BOL" }, { on = "", run = "kill eol", desc = "Kill forwards to the EOL" }, { on = "", run = "kill backward", desc = "Kill backwards to the start of the current word" }, { on = "", run = "kill forward", desc = "Kill forwards to the end of the current word" }, # Cut/Yank/Paste { on = "d", run = "delete --cut", desc = "Cut the selected characters" }, { on = "D", run = [ "delete --cut", "move 999" ], desc = "Cut until the EOL" }, { on = "c", run = "delete --cut --insert", desc = "Cut the selected characters, and enter insert mode" }, { on = "C", run = [ "delete --cut --insert", "move 999" ], desc = "Cut until the EOL, and enter insert mode" }, { on = "x", run = [ "delete --cut", "move 1 --in-operating" ], desc = "Cut the current character" }, { on = "y", run = "yank", desc = "Copy the selected characters" }, { on = "p", run = "paste", desc = "Paste the copied characters after the cursor" }, { on = "P", run = "paste --before", desc = "Paste the copied characters before the cursor" }, # Undo/Redo { on = "u", run = "undo", desc = "Undo the last operation" }, { on = "", run = "redo", desc = "Redo the last operation" }, # Help { on = "~", run = "help", desc = "Open help" }, { on = "", run = "help", desc = "Open help" }, ] [completion] keymap = [ { on = "", run = "close", desc = "Cancel completion" }, { on = "", run = "close --submit", desc = "Submit the completion" }, { on = "", run = [ "close --submit", "close_input --submit" ], desc = "Submit the completion and input" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, # Help { on = "~", run = "help", desc = "Open help" }, { on = "", run = "help", desc = "Open help" }, ] [help] keymap = [ { on = "", run = "escape", desc = "Clear the filter, or hide the help" }, { on = "", run = "escape", desc = "Clear the filter, or hide the help" }, { on = "q", run = "close", desc = "Exit the process" }, { on = "", run = "close", desc = "Hide the help" }, # Navigation { on = "k", run = "arrow -1", desc = "Move cursor up" }, { on = "j", run = "arrow 1", desc = "Move cursor down" }, { on = "", run = "arrow -1", desc = "Move cursor up" }, { on = "", run = "arrow 1", desc = "Move cursor down" }, # Filtering { on = "f", run = "filter", desc = "Apply a filter for the help items" }, ]